Moulds for plyform  Our implants for glueing, forming and facing of plywood and veneer strips for bent, enable to produce without the use of high-frequence.We produce wood moulds covered with sheets of alloy, also hibrid molds with copper piping inside for the fast drying up of the plyform.We also pruduce alluminium moulds obtained with casting or solid plate, equipped with pipings for the passage of warm liquid which thanks to the greater pressure speed up the drying up of the bonding agents .This technology is essential for the production of cylinders ,oval and cones without joints.

 

 

Moulds for skin door  This production line enables to produce with thin sheets of mdf , door skins moulded with wooden effect ready to make the hollow core doors .
The pressing procedure is carry out through by an high pressure press with warm platen and our engraved steel moulds which closing itself create the frames.
The procedure lasts some seconds ones and it is characterized  by alternate stages of aplication and degassing. You can see after the moulding the classic raised door with a wood grain effect,perfectly it will be aligned to simulate a solid wood door.
Generally a range of production is previews on two moulds for every types of door (2/4/6 panels) , rectangular or stylized ,with the possibility of obtaining various size with the same.

 

 

 

 

 

 

 

 

 

 

 

MOULDS for:
.....................................

 

 

 

 

 

COFFINS

 

 

 

....................................

H.P.L.

 

 

....................................

Moulds for solid wood   By hot pressing with solid wood it now becomes economically attractive to reproduce armchairs and detailing in any style, from any period.The work process allows us to achieve semi-finished wood products using our own copying templates and moulds, and ending with finely decorated pieces.Customers may order based on our own models or they may supply us with a personalized sample that will be reproduced with an accurate execution of the ornamental details.

Moulds for wood  pulp   Injecting the woodpulp  into the mould and compacting it, one can achieve manufactured products of the highest artistry at reduced costs for raw materials.

 

 

images/base_curved.jpg (3254 byte)BENT

 

 

......................................

 

 

images/base_mdfdoor.jpg (2293 byte)M.D.F. SKIN  DOOR

 

 

......................................

 

 

ORNAMENTAL Wave  PANELS

 

 

......................................

 

 

images/base_solidwood.jpg (2520 byte)SOLID  WOOD

 

 

......................................

 

 

COMPO 

 

 

......................................

 

 

HOME / MOULDS / WHEELS / MOULDED / GALLERY                   2009 Tecnostampi italiana S.r.L.              Privacy Policy